Construction Building Materials EPDM Waterproofin | RFQ Sourcing Details

. . Model NO.

EPDM008 Material High Polymer Name Pre-Applied HDPE Waterproof Membrane Type Roofing and Waterproofing Ceiling Tile Shape Roll Thickness 1.2mm Function Anti-static, Fireproof, Heat Insulation, Waterproof Usage Outdoor, Indoor After-sales Service 10years Warranty 10years Ceiling Tile Type HDPE Surface Treatment Sand Finish Transport Package Paper Tube Inside Per Roll,Woven Bag,About 10000 S Specification 1.2mm, 36kgs/roll Trademark STAR FORCE Origin China HS Code Production Capacity M2/Week Packaging & Delivery Package Size 36.00cm * 36.00cm * 100.00cm Package Gross Weight 30.000kg Construction building materials EPDM waterproofing membrane for pond liner roof tunnel pool basement EPDM Rubber Waterproofing Membrane Rubber membrane is manufactured from synthetic EPDM rubber.

The EPDM rubber membranes is a single-ply membrane that can be used for various applications such as waterproofing of basements, roofs/terraces, expansion joints, wet areas (toilet blocks), facades, etc. It is a single product that can be used for waterproofing most parts of a building.

The EPDM rubber waterproofing membranes are techno-commercially much better than substitutes such as bitumen membranes, crystalline products, admixtures, various coatings, etc. The use of these products may be avoided in projects where EPDM rubber membranes are used.

The EPDM waterproofing membranes are an excellent substitute to the torch-on membranes. Advantage: Resistant to UV, Ozone, and air pollutants. Wide range of temperature resistance form -40°C to +160°C.

Nearly millions of square meters of EPDM membrane have been installed on rooftops globally and they are known to have a service life of beyond 30 years. No torches or gas required during installation. Flame free and heat free installations. It is an environmentally and recyclable system. Lightweight: around 1.25.

Kgs/SQM. Single product for various areas such as basements, roofs, podiums/landscape areas, expansion joints, etc. Acts as an anti-root barrier. So they are idea for green roofs and landscape projects. Special grade of EPDM membrane are fire resistant.

Architects, roof consultants and contractors have come to depend on EPDM's time tested, long-term performance. Thickness(mm): 0.5, 1.0, 1.2, 1.5, 1.8, 2.0 Allowable deviation(%): -10 to +15 width(mm): 1000, 1200 Square meter (m2) / roller: 20, 24 The specifications can be customized by the buyers' requirments.

Product appearance Item number JF1- EPDM- 20mX1.0mX1.2mm Visible defects No defects, conform to GB/T Technical specification Item Standard GB/T Thickness mm 1.2(-5/+10%) Length m 20(-0.5/+1%) Width m 1.0(-1/+1%) Mass per unit area Kg/m2 1 Tensile Properties Max Tension strength (N/cm) >= Cross the roll ≥4.0 Mpa 9.1 Qualified Along the roll ≥4.0 Mpa 8.3 Qualified 2 Elongation at break (%) >= Normal temperature(23 ºC ) Cross the roll ≥ 400 480 Qualified Along the roll ≥ 400 492 Qualified Low temperature(-20 ºC ) Cross the roll ≥2 00 242 Qualified Along the roll ≥2 00 246 Qualified 3 Tensile Srenght at break Cross the roll ≥18 KN/m 27 Qualified Along the roll ≥18 KN/m 26 Qualified 4 Watertightness 0.3.

Mpa, 30 min, impermeable impermeable Qualified 5 Foldability at low temperature -30 ºC no cracks no cracks Qualified EPDM waterproof roll specification : The item name Value Applicable test items 1 Tension Strength (N/cm) (MPa) Normal temperature ≥ 7.5 GB6.3.2 60ºC ≥ 2.3 2 Elongation at break % Normal temperature ≥ 450 -20ºC 200 3 Tear strength N ≥ 25 GB6.3.3 4 Water tightness (0.3.

Mpa.

30 min) No Leakage GB6.3.4 5 Flexibility at low temperature (ºC)≤ -40 GB6.3.5 6 Heat expansion (mm) Extended ≤ 2 GB6.3.6 Contraction ≤ 4 7 Hot air ageing (80 ºC ×168h) Fracture tensile strength retention %≥ 80 GB6.3.7 Keep rate tore elongation %≥ 70 8 Alkaline [10%Ca(OH)2 Normal temperature×168h] Fracture tensile strength retention %≥ 80 GB6.3.8 Keep rate tore elongation %≥ 80 9 200×10-8 Ozone aging (40ºC×168h) - GB6.3.9 10 Artificial climate ageing Fracture tensile strength retention %≥ 80 GB6.3.10 Keep rate tore elongation %≥ 70 11 Bond peel strength N/mm Standard test condition ≥ 1.5 GB6.3.11 Inundate retention (Normal temperature×168h) %≥ 70 Application 1) Roofs, basement, toilet, bridge, underground, tunnel and dam.

2) Industrial and civil building waterproof. 3) Geo-synthetic liner for swimming pool, channels, irrigation system. 4) Especially for projects with high requirements in durability, anti-corrosion and deformation. Packaging, storage and transportation: 1.

Waterproof materials should be stored under dry and ventilated conditions. 2. Different types of membranes must be piled separa tically during transportation. 5. It should be kept away from sunshine and rainwater.

6.Transport and storage process should be away from the fire source, storage temperature does not exceed 35 ºC, the storage period is 1 year. Certificates: