
1 mm White Chemical Film-Formed Silica Aerogel In | RFQ Sourcing Details
Building Materials · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Building Materials. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
This 1 mm chemical film-formed aerogel felt is a thin thermal-insulation material based on nano aerogel and a flexible fiber substrate. The listed glass-fiber grade is white and is intended for applications where insulation thickness, flexibility, and resistance to heat transfer are important.
Supported product data The listed 1 mm grade has a thermal conductivity of no more than 0.021 W/m-K at 25°C and no more than 0.036 W/m-K at 300°C. Its stated maximum operating temperature is 1200°C, hydrophobic performance is at least 99%, and compression resilience is at least 90%.
The material is described as Grade A, comple m, and 15 minutes for 3 mm;these results should not be applied to other constructions or test conditions without documentation. The composite is described as using nano aerogel with glass fiber and other base fibers.
Chemical film coating is used to improve aerogel penetration and adhesion, while atmospheric high-temperature drying is part of the manufacturing process. The product is supplied in rolls, and customized dimensions are listed as available.
Potential uses The stated application areas include wall, roof, and floor insulation;industrial pipes, tanks, and equipment;oil and gas pipelines;electronics thermal management;cryogenic insulation;vehicles;aircraft;and protective or outdoor clothing.
Suitability for any specific system depends on the selected grade, thickness, substrate, operating temperature, installation method, and applicable regulations.
Procurement confirmation Before ordering, confirm that the quotation is specifically for the 1 mm white glass-fiber grade rather than the separate black pre-oxidized-fiber grade or a thicker customized product. Request the current technical data sheet and test reports for the exact construction offered.
Confirm roll width and length, thickness tolerance, density, facing or lamination, thermal-conductivity test conditions, allowable continuous-use temperature, flame-test method, burn-through test setup, hydrophobicity method, and dimensional stability.
Buyers should also verify whether cutting, dust-control measures, edge treatment, mechanical protection, vapor control, adhesives, or fasteners are required for the intended installation.
Confirm packaging configuration, gross and net roll weight, production lead time, inspection criteria, lot traceability, storage requirements, and the acceptance procedure before placing a production order.
Mm | Applications and Buyer Notes
mm is organized as a sourcing-ready Building Materials reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questions b
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Building MaterialsBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Form
- RollsBased on visible page data; confirm exact value in the RFQ.
- Color
- WhiteBased on visible page data; confirm exact value in the RFQ.
- Width
- CustomizableBased on visible page data; confirm exact value in the RFQ.
- Product type
- Chemical film-formed aerogel insulation feltBased on visible page data; confirm exact value in the RFQ.
- Listed thickness
- 1 mmBased on visible page data; confirm exact value in the RFQ.
- Composite materials
- Nano aerogel and glass fiber with other base fibersBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1 Mm White Chemical Film Formed Silica Aerogel Insulation FeltThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Knowledge sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Building Materials categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Agriculture And Foods categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Industrial Supplies categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Security And Protection categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 16 Mm Metal And Polyurethane 3d Exterior Wall Cladding PanelThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Application sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Solution sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10 Mm Pu Insulated Decorative Sandwich Wall PanelThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 12 Mm Pure Magnesium Sulfate Mgo Board For Interior Walls Ceilings And FloorsThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 2000 Mm Customizable Galvanized Corrugated Steel Roofing SheetThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
PeakExporter related sourcing paths
PeakExporter related product samples
PVC Weather Boards PVC weather board vinyl siding is the 2nd generation / upgrade of PVC vinyl siding, w hich has 50 yea...
Building Materials Durable Fiber Cement Board for Fireproof Construction Projects - Fireproof Material Board and EngineCement fiber board Cement fiberboard is manufactured using high-grade Portland cement and carefully selected quartz as p...
Building Materials Fiber Cement Ventilated Facade Panel Eco-Friendly Green Building Materials - Calcium Silicate BoardColored Cement Composite Panels,Prepainted Fiber Cement Facade (Formerly called fiber cement panels/fiber reinforced cem...
Building Materials Light Steel Modular Design Steel Construction Building Material H Beam, C/Z Purlin - Steel Materials1. Grade: Q235,Q345,A36,SS400 S235jr... 2. Material: Mild steel,stainless steel,aluminum,brass 3. Heat treatment Normali...
Building Materials Radition Curing Oligomer UV Resin Building Material - Polymer and UV ResinEpoxy Acrylate:CR82942 CR82942 is a epoxy acrylate oligomer. It has high reactivity and good flexibility. It is suggeste...
Building Materials Prefabricated Steel Structure Building Material for Parking Shed - Steel Structures and CarportWelcome to reply the following question, if you need our design the drawing for you. 1.Location(where will the project b...





