Ceramic tile adhesive mortar

Jinan standard source building materials co., LTD. (www.jnbiaoyuan.com), the production of ceramic tile adhesive and mortar, it is mainly used for stickup ceramic tile, brick, tile and other decorative materials, widely used in internal and external walls, floor, bathroom, kitchen, and other places of building the veneer of decoration.Its main characteristic is high bonding strength, water resistance, freeze-thaw resistance, ageing resistance performance is good and the construction is convenient, is a kind of ideal material.Construction ceramic tile adhesive reduces the traditional construction technology for grassroots sprinkler and the dependence of the leaching process of brick, better avoided by sprinkling water immersion brick, was not enough.Will a pack (www.jnbiaoyuan.com) materials according to the specified water distribution than mixed stirring, stirring evenly without aggregation, make pulp stand for 3 to 5 minutes, stirring again can be used.Choosing the right gear type scraper area to ensure effective paste to rare board, ceramic tile, etc. 65% of the area.The mortar with special tooth type scraper full batch of base level 3 to 5 mm thick, and then use scraper with one side of the tooth in a straight line or pull s-shaped stripes, scraper plane and plane intersection is 45 degrees to 60 degrees at the grass-roots level.Ceramic tile not flooded, simply press order to paste on the wall/floor and compaction.And adjust ceramic tile location within the prescribed period of time.Wet solid mucilage can remove with water, but can only use mechanical methods to remove after curing.Products can be applied in the elevator and completely high-rise building external wall of marble and ceramic tile paste

Construction matters needing attention

1, construction temperature for 5 to 40 ℃.

2, it is best to use electric blender mixing, let stand stir again after help to increase the cohesive force.

3, with the proportion of water can be due to the substrate, the weather, construction conditions such as different and make appropriate adjustments.

4, in rainy day construction, must be covered protective measures, and to ensure that within 24 h after tile, construction areas don't get wet by rain.

5, make good standard source building materials should be controlled according to the weather conditions used up within 2 to 3 h.

6, avoid by all means will have hard mixed with water before use.After completion of

7, tiles, when the standard source building materials bonding agent completely dry solid (about 24 h) to take the next step of caulking process.

8, the source materials coating should be uniform and stick, the thickness of adhesive layer should be used for approximately half of the tooth type scraper pitch is high.

Reference usage (www.jnbiaoyuan.com)

1, stickup ceramic tile of small size, it is s ested that the 6 mm x 6 mm tooth type scraper.

2, stickup ceramic tile of large size, it is recommended that the 10 mm x 10 mm or 12 mm x 12 mm tooth type scraper.

3, in the use of different dosage of tooth type scraper as reference:

Packaging storage and transportation

1, the product packaging for kraft paper bags,packaging specifications for 25 kg/bag.

2, this product unopened, should be stored in a dry, cool, ventilated place.Under normal conditions of storage and transport, guarantee period is 12 months