Self Adhesive Bitumen Waterproof Tape for roofing crack seal

SELF ADHESIVE BITUMEN WATERPROOF TAPE

 GENERAL DEscriptION 

The self adhesive bitumen waterproof tape is composed of surface films (PET film, aluminum foil or HDPE film), adhesive rubber/bitumen compound and release film.

 FRES 

* Provides an instant seal

* Easily applied by hand pressure only

* Safe application , no pollution

* Available in wide range of widths, thickness, colorsYPCAL 

* Roof repair of portable buildings

* Replacement or repair of flashing     
* Guttering, down pipes, skylights
* Extensions, porches, window frames & chimneys, jointing for artificial grass
*Caravans & Conservatories
* Sealing parapets, valley gutters
* Seals capping bolts & roof ridges

TECHNICAL DATA 

 PCKIN

Available in 50 mm,75 mm,100 mm,150 mm,200 mm,225 mm,250 mm,300 mm rolls of

2.5 m,3.0 m, 5.0 m,1 0m,20 m length

Special sizes made to order

PLICATION GUIDAN

*  Ensure that the surface is dry and free from dust, rust and loose materials.
*  Prime porous surface e.g. concrete and brick with a bitumen primer or black,      bitumen paint, thinned with white spirit, which is allowed to dry.

*  Cut the flashing tape to the required length.

*  Peel back 5cm (approx) of the release backing paper and position carefully.        Continue removing the backing paper whilst firmly placing the tape to avoid       unnecessary creasing.

*  Smooth down so that the overall contact is complete, and ensure that all air       bubbles are removed. Take care not to damage the surface of the tape.

*  Where tape is joined, ensure that there is an overlap of at least 1inch or 2.5cm.

*  After use release pack and store upright in cool and dry conditions.