Cuttable Explosion-proof Flexible LED Strip Lights for Underground Mining_Lighting_Consumer Electronics & Lighting_Products

Top Selling

品牌：: BRANDO

Model: BO-SL60-24V(A)

Origin: Made In China

Label: Mining strip light , IP68 led strip light , cuttable strip light

Our plug and play system

Conventional lighting requires separate power and a wired connection to every lamp, needing the expertise of electricians. This becomes labour-intensive and costly when running many meters of lighting. The BRANDO LED Strip Lighting plugs into an existing power source using a power supply which then connects to one end of the LED strip. A single power supply will light a 20 meter LED segment. To extend beyond 20 meters, just add another power supply at the other end and connect the next section of LED strip – it's that simple.

Maintenance-free. Easy to repair.

Damage to lighting through routine underground activities happens. When a conventional lamp is damaged, it results in loss of illumination over many meters – making the affected area a safety hazard until repaired by a qualified electrician. Should a section of the BRANDO strip light be damaged, only this section loses light. The remaining portion of the strip continues to provide illumination – allowing for a safer environment. Additionally, damaged sections can be replaced in 8" strips – making it a quick and cost-effective fix.

• Intelligent temperature management, sensors monitor LED temperature and if safe parameters are exceeded the affected LED’s are automatically dimmed until safe temperatures are restored.

• Intelligent voltage surge management, restorable resistors limit overcurrent and overvoltage situations.

• AC to DC convertors, miniature voltage convertors.

• Short circuit protection, in the case of short circuit the power is isolated until the circuit is normalized.

Dimension: 10000mm(length） *20mm(width） *10mm(height）

TECHNICAL PARAMETERS:

Part Number	BO-SL60-24V(A)
LED Chip	Epistar
LED configuration	72 LED's spaced evenly over a metre length
Range fed from both sides	20 metres
Recommended fixing height	5 - 6 Metres
IP Rating	68
Power Consumption per LED	0.25 Watts
Power Consumption per Metre	15 Watts
Colour Rendering Index CRI	> 80
Colour temperature	10000 Kelvin
Luminous Efficacy	80 Lumens / Watt
Voltage on lighting VDC	24 VDC
Supply voltage for power controllers VAC	85 - 265 VAC
Light maintenance	15%-20% Drop over 4 years
Lifespan	5 Years
Warranty Lighting	3 Years
Outer covering	Food grade silicone
Dimensions	5000mm(length） 20mm(width） 10mm(height）
Tensile strength	+-50KG
Operating temperature	-40℃ to 120℃
Protection	Short Circuit Over Voltage Over temperature Over Current

BRANDO related Mining Strip Light

Part Number	LED configuration	Range	Power/ meter	Light Source	Working Voltage	Luminous Efficacy	Colour Temperature	Dimensions	Outer covering	IP Rating
BO-SL60-24V(A)	60 LEDs/m	20m	15W	5050	DC24V	80Lumens / Watt	10000 Kelvin	L: 10000mm W: 20mm H: 10mm	Food grade silicone	68
BO-SL60-36V(A)	60 LEDs/m	40m	15W	5050	DC36V	80Lumens / Watt	10000 Kelvin	L: 10000mm W: 20mm H: 10mm	Food grade silicone	68
BO-SL60-110V(A)	60 LEDs/m	100m	15W	5050	AC110V	80Lumens / Watt	10000 Kelvin	L: 10000mm W: 20mm H: 10mm	Food grade silicone	68
BO-SL60-220V(A)	60 LEDs/m	100m	15W	5050	AC220V	80Lumens / Watt	10000 Kelvin	L: 10000mm W: 20mm H: 10mm	Food grade silicone	68

1, The power supply can drive one length or different lengths within allowed maximum length by feeding

light both ends.

2, To minimize the voltage drop and keep light consistency, position power supply nearest to the power feed end of LED strip light and keep the power line as short as possible.

Contacts