close control air conditioner

CLOSE ConTROL AIR CONDITIONER
Indoor/outdoor installation
Capacity from 9. to 5. KW
Modular
Modular design close control air conditioner, easy
connection
through special made joints. Operating in combination
with remote air cooled condenser.
Structure
Panels and base are made from galvanized steel
protected with polyester powder painting to ensure
total resistance to atmospheric agents.
Scroll compressor
With thermal overload protection, crankcase heater
and rubber antivibration mounts.
Filters
Middle efficiency filter made from non-woven cloth,
housed in agalvanized steel frame.
Humidification
With electrode heating type humidifier.
Centrifugal fans
With directly coupled electric motors installed on antivibration
mounts. Differential pressure switch for air
flow detection.
Refrigerant circuit
Complete with sight glass, filter dryer, thermostatic
expansion valve, liquid receiver, high and low
pressure switch, service valve, shut-off valve for
Characteristics
Functions and features
Note:
1) ?he performance data are referred to inlet air temperature: 23˚Cwith 50% RH, condenser air temperature 35˚C.
??ound pressure measured at 1 m away from the unit in open field.
) The data included in ( ) are for the HFDC series.
) Max refrigerant pipe length between the indoor and outdoor unit: 5m.
4) Remote air cooled condenser working temperature: - 8 ÷ 45 ºC
Technical data
external connections.
Air treatment coil
With copper tubes and aluminum fins, fitted with
aluminum condensate tray.
Electric panels
With contactors, breakers, power and control circuit
protection and phase sequence relay. Microprocessor
controlled unit with function display.
Remote condenser
Direct expansion type air cooled condenser, made from
copper tubes and aluminum fins complete with axial
fans for outdoor installation and fan speed regulator.
Testing
Oil charging and a dry run test are carried out in factory.
The units are delivered with the refrigerant circuit
charged with nitrogen.